RF-Powered Wireless Sensors

EE Times 20 Hot Technologies for 2012

RF Wireless Sensors — Fri, 23 Dec 2011 18:26:53 +0000

EE Times has recently release a list of their selected 20 Hot Technologies for 2012:

1. MEMS
2. Wireless Sensor Networks
3. Internet of Things
4. Plastic Electronics
5. Near-Field Communications (NFC)
6. Printed Electronics
7. Energy Harvesting
8. Graphene
9. Next-generation non-volatile memory
10. Processors
11. Graphics and GPGPU
12. EUV Lithography
13. Solar conversion
14. White space radio
15. LTE
16. 40/100 Gbit/second Ethernet
17. Mobile OSes with Android
18. AMOLEDs
19. Smart grid technologies
20. 3-D ICs

Wireless Charging and Energy Harvesting among Top 50 Tech Trends

RF Wireless Sensors — Fri, 14 Oct 2011 19:00:59 +0000

Frost & Sullivan has recently released a report detailing the Top 50 Tech Trends. Included among them are Wireless Sensors, Energy Harvesting, and Wireless Charging.

Wireless Power for Remote Monitoring

RF Wireless Sensors — Tue, 27 Sep 2011 12:14:49 +0000

Powercast recently presented (09/21/2011) at the Remote Monitoring & Control Conference in Nashville, TN. The cost of installing wiring can range from $200 per device to >$1000 per foot in some industrial environments. In either case, wireless power transmission over distance using RF energy can potentially be a suitable alternative to running wires or replacing batteries.

Conference overview | Powercast presentation (PDF)

Electronic Products - RF Energy Harvesting and Wireless Power

RF Wireless Sensors — Thu, 01 Sep 2011 02:00:01 +0000

An article by Powercast titled “RF Energy Harvesting and Wireless Power” was published by Electronic Products.

“The market growth of low-power wireless devices particularly sensors is driving tremendous interest in using energy sources that can power the devices autonomously. The cost of running wires and the future cost of replacing batteries have discouraged users from widely deploying a verity sensor-based devices.

While solar has been widely used for years to power remote devices, several other types of energy-harvesting approaches have emerged for micro-power applications including vibration, thermal, mechanical, and RF. Of these technologies, RF energy is the only one that can provide either an intentional or ambient power source for wire-free or battery-free applications.”

RF Energy Harvesting Perpetually Powers Wireless Sensors

RF Wireless Sensors — Sun, 31 Jul 2011 12:43:14 +0000

Both ECN and Wireless Design & Development (WD&D) have published a recent article by Powercast titled “RF energy Harvesting Perpetually Powers Wireless Sensors”, which looks at using broadcasted RF energy as a reliable long-term power source for battery-less wireless sensors.

Powercast demonstrates wireless charging of credit card size smart cards

RF Wireless Sensors — Tue, 28 Jun 2011 15:48:49 +0000

Powercast exhibited at the Sensors Expo 2011 and demonstrated using RF energy harvesting to wirelessly charge credit card size devices. The devices are representative of high function, rechargeable smart cards and contained rechargeable thin-film batteries - CYMBET EnerChip, Infinite Power Solutions THINERGY, and STMicroelectronics EnerFilm.

The video below shows the rechargeable smart card devices receiving charge from an RF transmitter. The transmitter was on the floor under the table.

For more wireless power videos visit Powercast’s channel on YouTube.

RFID Journal reviews Powercast’s Battery-less Wireless Sensor System

RF Wireless Sensors — Wed, 18 May 2011 17:01:10 +0000

An article in RFID Journal recently reviewed the Powercast Lifetime Power Wireless Sensor System which has battery-less wireless sensors (passive wireless sensor tags) powered by RF energy.

“Powercast Corp. is marketing active RFID sensor tags that harvest power from RF signals. The system includes an RF transmitter that provides power signals to sensor tags, and a gateway that receives information transmitted by those tags. The company’s focus is on developing solutions for the wireless transmission of sensor data, such as what is required by data centers. In this case, rather than using wired sensors or traditional active RFID tags to send sensor data regarding a room’s conditions, the Powercast system simply uses continuous RF signals to charge a battery or capacitor built into a sensor tag. The solution, known as the Lifetime Power Wireless Sensor System, targets the heating, ventilating and air conditioning (HVAC) sector, as well as other building-controls industries, by providing a solution for acquiring data from sensors for heating and air-conditioning, lighting controls, access controls or other building automation.”

Powercast Releases Battery-less, Wireless-powered Sensor System for Building and Industrial Automation

RF Wireless Sensors — Wed, 20 Apr 2011 17:48:50 +0000

Powercast has released a battery-less, wirelessly-powered sensor system for building and industrial automation - the Lifetime Power® Wireless Sensor System. The sensor units can be powered at a range of 60-80 feet (18-24 m) from Powercast’s 3W, 915MHz transmitter (TX91501). The initial sensor unit is for temperature and humidity and is to be followed by other types such as CO2, light, and motion.

Powercast Lifetime Power® Wireless Sensor System

The access point (WSG-101 BAS gateway) supports up to 100 sensors and 800 sensor points for large-scale and high-density deployment of sensors. The sensors are battery-free and operate when sufficient charge is stored to take sensor readings and send a data packet. Wireless communication from the sensor nodes to the access point is 2.4GHz using industry-standard 802.15.4 radios. The BAS gateway supports several physical interfaces and a range of BAS protocols to interface with nearly every major type of wired BAS network, including BACnet, Modbus, Metasys N2, and LonWorks.

The system was developed based on the same core technology as the Powercast P2110 Powerharvester receiver and the P2110-EVAL-01 Energy Harvesting Development Kit, both of which are available for other sensor OEMs to embed Powercast’s technology into their own products.

Product Page | Press Release | Product Presentation (PDF)

Powercast wireless power charges keyboards, mice, and game controllers

RF Wireless Sensors — Wed, 30 Mar 2011 17:13:29 +0000

The video below demonstrates how Powercast’s wireless power technology charges multiple devices simultaneously, and in this case a wireless keyboard, a wireless mouse, and a wireless game controller. The amount of power being delivered to these devices is in the low mW range.

Some applications can be powered directly from the transmitter, but for most consumer electronic devices trickle-charging a battery will be more appropriate.

For more wireless power videos visit Powercast’s channel on YouTube.

ECN: Energy Harvesting Suits Remote Low Power Devices

RF Wireless Sensors — Mon, 28 Feb 2011 14:44:31 +0000

John Titus at ECN has recently published an article titled “Energy Harvesting Suits Remote Low Power Devices“, which includes updates on energy harvesting technology from multiple companies including CYMBET, Humdinger, Microstrain, Mide, and Powercast.

Grabbing “free” energy involves more engineering than buying an off-the-shelf transducer. Contrary to what you might think, the awareness of “green power” didn’t spawn the drive to harvest energy. Low-power electronic fabrication technologies did the trick. They cut the power needs of small monitoring devices to the point where energy harvesting has started to make engineering and economic sense.